Irrespective of the design software used, i.e. Multinail, Pryda or Mitek the detailing process is basically the same.
Turb-O-Webs have been used successfully in Australia for over 27 years now.
Turb-O-Webs are enabled in the software and the specific lengths, grade and costings of the Turb-O-Webs to be stocked are entered into the program. Once this is done the plant is ready to design and build trusses using precut Turb-O-Webs.Jobs are simply designed in exactly the same way the plant normally would design jobs.
The only difference is that the software will preferentially use precut Turb-O-Webs wherever possible. All other plant design preferences will remain unchanged. We have provided some examples below.
In every example we show the number of webs replaced with Turb-O-Webs. We show the number of parts eliminated from cutting for each truss, plus the leverage effect gained by using precut Turb-O-Webs.
Precut Turb-O-Webs : Replace 62% of webs, cut only 38% of webs.
Eliminate 44% of total cutting, cut only 56% of all truss components.
That’s a 78% Leverage to saw output.
Cut 56% of the truss parts.
Use 44% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 35% of webs, cut only 65% of webs.
Eliminate 24% of total cutting, cut only 76% of all truss components.
That’s a 32% Leverage to saw output.
Cut 76% of the truss parts.
Use 24% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 70% of webs, cut only 30% of webs.
Eliminate 50% of total cutting, cut only 50% of all truss components.
That’s a 100% Leverage to saw output.
Cut 50% of the truss parts.
Use 50% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 43% of webs, cut only 57% of webs.
Eliminate 27% of total cutting, cut only 73% of all truss components.
That’s a 37% Leverage to saw output.
Cut 73% of the truss parts.
Use 27% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 31% of webs, cut only 69% of webs.
Eliminate 18% of total cutting, cut only 82% of all truss components.
That’s a 22% Leverage to saw output.
Cut 82% of the truss parts.
Use 18% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 67% of webs, cut only 33% of webs.
Eliminate 35% of total cutting, cut only 65% of all truss components.
That’s a 54% Leverage to saw output.
Cut 65% of the truss parts.
Use 35% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 89% of webs, cut only 11% of webs.
Eliminate 47% of total cutting, cut only 53% of all truss components.
That’s an 89% Leverage to saw output.
Cut 53% of the truss parts.
Use 47% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 50% of webs, cut only 50% of webs.
Eliminate 30% of total cutting, cut only 70% of all truss components.
That’s a 45% Leverage to saw output.
Cut 70% of the truss parts.
Use 30% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 62% of webs, cut only 38% of webs.
Eliminate 33% of total cutting, cut only 67% of all truss components.
That’s a 49% Leverage to saw output.
Cut 67% of the truss parts.
Use 33% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 80% of webs, cut only 20% of webs.
Eliminate 47% of total cutting, cut only 53% of all truss components.
That’s an 89% Leverage to saw output.
Precut Turb-O-Webs : Replace 50% of webs, cut only 50% of webs.
Eliminate 27% of total cutting, cut only 73% of all truss components.
That’s a 37% Leverage to saw output.
Cut 73% of the truss parts.
Use 27% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 67% of webs, cut only 33% of webs.
Eliminate 38% of total cutting, cut only 62% of all truss components.
That’s a 61% Leverage to saw output.
Cut 62% of the truss parts.
Use 38% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 90% of webs, cut only 10% of webs.
Eliminate 56% of total cutting, cut only 44% of all truss components.
That’s a 127% Leverage to saw output.
Cut 44% of the truss parts.
Use 56% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 67% of webs, cut only 33% of webs.
Eliminate 36% of total cutting, cut only 64% of all truss components.
That’s a 56% Leverage to saw output.
Cut 64% of the truss parts.
Use 36% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 50% of webs, cut only 50% of webs.
Eliminate 27% of total cutting, cut only 73% of all truss components.
That’s a 37% Leverage to saw output.
Cut 73% of the truss parts.
Use 27% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 50% of webs, cut only 50% of webs.
Eliminate 27% of total cutting, cut only 73% of all truss components.
That’s a 37% Leverage to saw output.
Cut 73% of the truss parts.
Use 27% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 60% of webs, cut only 40% of webs.
Eliminate 37% of total cutting, cut only 63% of all truss components.
That’s a 59% Leverage to saw output.
Cut 63% of the truss parts.
Use 37% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 83% of webs, cut only 17% of webs.
Eliminate 45% of total cutting, cut only 55% of all truss components.
That’s an 82% Leverage to saw output.
Cut 55% of the truss parts.
Use 45% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 87% of webs, cut only 13% of webs.
Eliminate 50% of total cutting, cut only 50% of all truss components.
That’s a 100% Leverage to saw output.
Cut 50% of the truss parts.
Use 50% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 50% of webs, cut only 50% of webs.
Eliminate 33% of total cutting, cut only 67% of all truss components.
That’s a 49% Leverage to saw output.
Cut 67% of the truss parts.
Use 33% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 100% of webs, cut NO webs.
Eliminate 57% of total cutting, cut only 43% of all truss components.
That’s a 133% Leverage to saw output.
Cut 43% of the truss parts.
Use 57% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 50% of webs, cut only 50% of webs.
Eliminate 25% of total cutting, cut only 75% of all truss components.
That’s a 33% Leverage to saw output.
Cut 75% of the truss parts.
Use 25% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 67% of webs, cut only 33% of webs.
Eliminate 40% of total cutting, cut only 60% of all truss components.
That’s a 67% Leverage to saw output.
Cut 60% of the truss parts.
Use 40% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 100% of webs, cut NO webs.
Eliminate 50% of total cutting, cut only 50% of all truss components.
That’s a 100% Leverage to saw output.
Cut 50% of the truss parts.
Use 50% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 33% of webs, cut only 67% of webs.
Eliminate 20% of total cutting, cut only 80% of all truss components.
That’s a 25% Leverage to saw output.
Cut 80% of the truss parts.
Use 20% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 40% of webs, cut only 60% of webs.
Eliminate 25% of total cutting, cut only 75% of all truss components.
That’s a 33% Leverage to saw output.
Cut 75% of the truss parts.
Use 25% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 50% of webs, cut only 50% of webs.
Eliminate 29% of total cutting, cut only 71% of all truss components.
That’s a 41% Leverage to saw output.
Cut 71% of the truss parts.
Use 29% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 25% of webs, cut only 75% of webs.
Eliminate 14% of total cutting, cut only 86% of all truss components.
That’s a 16% Leverage to saw output.
Cut 86% of the truss parts.
Use 14% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 75% of webs, cut only 25% of webs.
Eliminate 50% of total cutting, cut only 50% of all truss components.
That’s a 100% Leverage to saw output.
Cut 50% of the truss parts.
Use 50% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 33% of webs, cut only 67% of webs.
Eliminate 20% of total cutting, cut only 80% of all truss components.
That’s a 25% Leverage to saw output.
Cut 80% of the truss parts.
Use 20% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 73% of webs, cut only 27% of webs.
Eliminate 42% of total cutting, cut only 58% of all truss components.
That’s a 72% Leverage to saw output.
Cut 58% of the truss parts.
Use 42% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 80% of webs, cut only 20% of webs.
Eliminate 50% of total cutting, cut only 50% of all truss components.
That’s a 100% Leverage to saw output.
Turb-O-Web Australia Pty Ltd.
0418 488 935
Cut 50% of the truss parts.
Use 50% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 50% of webs, cut only 50% of webs.
Eliminate 29% of total cutting, cut only 71% of all truss components.
That’s a 41% Leverage to saw output.
Cut 71% of the truss parts.
Use 29% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 60% of webs, cut only 40% of webs.
Eliminate 33% of total cutting, cut only 67% of all truss components.
That’s a 49% Leverage to saw output.
Cut 67% of the truss parts.
Use 33% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 80% of webs, cut only 20% of webs.
Eliminate 53% of total cutting, cut only 47% of all truss components.
That’s a 113% Leverage to saw output.
Cut 47% of the truss parts.
Use 53% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 33% of webs, cut only 67% of webs.
Eliminate 17% of total cutting, cut only 83% of all truss components.
That’s a 20% Leverage to saw output.
Cut 83% of the truss parts.
Use 17% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 62% of webs, cut only 38% of webs.
Eliminate 38% of total cutting, cut only 62% of all truss components.
That’s a 61% Leverage to saw output.
Cut 62% of the truss parts.
Use 38% precut Turb-O-Webs
Precut Turb-O-Webs : Replace 57% of webs, cut only 43% of webs.
Eliminate 36% of total cutting, cut only 64% of all truss components.
That’s a 56% Leverage to saw output.
Cut 64% of the truss parts.
Use 36% precut Turb-O-Webs