Sample Turb-O-Web Trusses.

Easy Designing with Precut Webs

Irrespective of the design software used, i.e. Multinail, Pryda or Mitek the detailing process is basically the same.

Turb-O-Webs are enabled in the software and the specific lengths, grade and costings of the Turb-O-Webs to be stocked are entered into the program. Once this is done the plant is ready to design and build trusses using precut Turb-O-Webs.

Jobs are simply designed in exactly the same way the plant normally would design jobs.

The only difference is that the software will preferentially use precut Turb-O-Webs wherever possible. All other plant design preferences will remain unchanged.

We have provided some examples below.

Sloping flat roof truss with northlight constructed using precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 62% of webs – Eliminate 44% of total cutting.

Sloping Flat truss with parapet and box gutter constructed using precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 35% of webs – Eliminate 24% of total cutting.

Sloping Flat roof truss and precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 70% of webs – Eliminate 50% of total cutting.

Three Precut Turb-O-Webs in a cut-off Truncated Standard Truss with fink profile.

Precut Turb-O-Webs : Replace 43% of webs – Eliminate 27% of total cutting.

Vault Truss with precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 31% of webs – Eliminate 18% of total cutting.

Trunc Standard with 3x verticals, Turb-O-Max joint and 6 precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 67% of webs – Eliminate 35% of total cutting.

Scissor Truss with king post and precut Turb-O-Webs.

 

Precut Turb-O-Webs : Replace 89% of webs – Eliminate 47% of total cutting.

Vault Truss with Turb-O-Max joint and seven precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 30% of total cutting.

Double Truncated Girder with Precut Turb-O-Webs and vertical webs.

Precut Turb-O-Webs : Replace 62% of webs – Eliminate 33% of total cutting.
Double Truncated Girder

Truncated standard truss with Turb-O-Max joint in the bottom chord centre and 8 precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 80% of webs – Eliminate 47% of total cutting.

12.4m truss with internal supports built using Turb-O-Webs.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 27% of total cutting.

Standard modified queen truss using 6 precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 67% of webs – Eliminate 38% of total cutting.

Truncated Standard truss with fink web pattern using precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 90% of webs – Eliminate 56% of total cutting.
Trucated Standard

Four precut Turb-O-Webs in a Truncated Standard Roof truss with fink profile.

Precut Turb-O-Webs : Replace 67% of webs – Eliminate 36% of total cutting.

Four precut Turb-O-Webs in a Truncated Girder Roof truss with vertical webs.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 27% of total cutting.
Truncated Girder

Truncated Girder Truss with vertical webs plus precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 27% of total cutting.
Truncated Girder

Three precut Turb-O-Webs in a standard truss with cutoff.

Precut Turb-O-Webs : Replace 60% of webs – Eliminate 37% of total cutting.

5 Precut Turb-O-Webs used in a fink profile truncated standard truss.

Precut Turb-O-Webs : Replace 83% of webs – Eliminate 45% of total cutting.

Truncated Standard truss showing application for precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 87% of webs – Eliminate 50% of total cutting.

Mono Trunc. Standard, Fink pattern with internal supports and precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 33% of total cutting.

Four Precut Turb-O-Webs in a fink girder truss.

Precut Turb-O-Webs : Replace 100% of webs – Eliminate 57% of total cutting.
Girder Truss

Precut Turb-O-Web in a Jack Truss.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 25% of total cutting.

Jack truss with two precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 67% of webs – Eliminate 40% of total cutting.

four precut Turb-O-Webs in an "A" type fink truss.

Precut Turb-O-Webs : Replace 100% of webs – Eliminate 50% of total cutting.

Roof Truss showing 33% webs replaced by precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 33% of webs – Eliminate 20% of total cutting.

A pair of precut Turb-O-Webs in a Girder Truss.

Precut Turb-O-Webs : Replace 40% of webs – Eliminate 25% of total cutting.
Girder Truss

Truncated standard truss with three vertical webs and precut webs. Custom end at one heel.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 29% of total cutting.

Mono Girder Roof Truss manufactured using a precut Turb-O-Web.

Precut Turb-O-Webs : Replace 25% of webs – Eliminate 14% of total cutting.
Mono Trunc. Girder

Mono Valley Truss with vertical Turb-O-Webs.

Precut Turb-O-Webs : Replace 75% of webs – Eliminate 50% of total cutting.

Mono Truncated Standard Truss with precut Turb-O-Webs and internal support.

Precut Turb-O-Webs : Replace 33% of webs – Eliminate 20% of total cutting.

Cut-off modified queen scissor truss with precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 73% of webs – Eliminate 42% of total cutting.

Hip truss with four precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 80% of webs – Eliminate 50% of total cutting.

Standard Truss with internal support and precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 29% of total cutting.

Standard Truss with heater/ ac loadings, internal support and precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 50% of webs – Eliminate 27% of total cutting.

Standard Fink Truss with modified heel, internal support and precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 60% of webs – Eliminate 33% of total cutting.

Fink profile trunc. standard with internal support and precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 80% of webs – Eliminate 53% of total cutting.

King Post Roof Truss with a single precut Turb-O-Web.

Precut Turb-O-Webs : Replace 33% of webs – Eliminate 17% of total cutting.

Truncated standard truss, fink profile, internal support and 62% of webs are precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 62% of webs – Eliminate 38% of total cutting.

Modified Queen profile truss with precut Turb-O-Webs.

Precut Turb-O-Webs : Replace 57% of webs – Eliminate 36% of total cutting.

Irrespective of the design software used, i.e. Multinail, Pryda or Mitek the detailing process is basically the same.

Turb-O-Webs are enabled in the software and the specific lengths, grade and costings of the Turb-O-Webs to be stocked are entered into the program. Once this is done the plant is ready to design and build trusses using precut Turb-O-Webs.

Jobs are simply designed in exactly the same way the plant normally would design jobs.

The only difference is that the software will preferentially use precut Turb-O-Webs wherever possible. All other plant design preferences will remain unchanged.