Costings and Designs

Computer Generated Costings and Design.

Computer Costing And Design.

It is an easy setup to design and quote using standard length Turb-O-Webs.

A few default and inventory changes is all that it takes.

Your computer design system can be easily setup to both design and quote/cost truss jobs using standard length Turb-O-Webs.

Computer Design Software.

Computer truss design software in Australia easily handles truss design and quoting with standard length Turb-O-Webs.

Each system is different but there are common minimum setup requirements.

Minimum Setup For Turb-O-Web Truss Design And Costings.

1 ) Enable the  use of the Turb-O-Web System in the truss design software..

2 ) Enter into inventory the standard length Turb-O-Webs to be used and the cost for each.
Standard length Turb-O-Webs vary in 150 mm increments so enter all the lengths to be used.

There may be varying other steps required between individual software providers , so follow these as well.

That’s It !

Your software should be now setup to both design and cost/ quote truss jobs using Turb-O-Webs.

Man at computer doing Turb-O-Web Costings.

Computer Costings.

Costs derived by design software  will “overstate” the price of the Turb-O-Web trusses
because it will include a cost for cutting the webs even though they are supplied precut.

This is a limitation in the setup of the costing programs and it does not present any problems.
In effect the systems cost the Turb-O-Webs material correctly but use the original EqA values which includes cutting.

So the costings include cutting costs for Turb-O-webs, even though there is none.

Cost Comparison Of Turb-O-Webs V’s Angle Cut Webs.

Truss design software overstate the labour cost of Turb-o-Web trusses.

Therefore they cannot provide any meaningful comparison of costs between a job with Turb-O-Webs and one without.

The software cannot distinguish the labour, cutting and overheads costs  of Turb-O-Web trusses
from the costs of manufacturing an all angle cut web truss.

It uses the same costs for both !

Using the Computer Costings.

Users of precut Turb-O-Webs are aware of how the costing systems work and it does not cause them any problems-they just don’t use the costing software to compare using Turb-O-Webs V’s using Angle Webs.

 

Contact Turboweb Australia for more information on the benefits and use of pre-cut Turb-O-Webs.

Turboweb Australia Pty Ltd.
PO Box 442
Swansea NSW 2281

0418 488 935

 

Pre-Cut Turb-O-Webs are manufactured using the Patented Multi-Faceted End.
Patent in Australia No. 2004202948, MULTI-FACETED END FOR ROOF TRUSS WEB.
Patent in Australia No. 2004216626, METHOD OF CUTTING SEGMENTED-END TRUSS WEB
Icons from flaticon.com

© 2017 All Rights Reserved Turboweb Australia Pty Ltd.